Cooling machine produced by China Fote Machinery with advantages of good cooling effect,shortening cooling time,high heat efficiency,and it can also improving the grindability of materials..Get Price
Cooling machine produced by Fote Heavy Machinery can widely used in building materials, cement, metallurgical and other industries, mainly used to cool slag and other materials. The cooler using the principle of heat exchange and air or cold water as the medium, cools down the high- temperature material at the same time collects hot gas into the kiln again, realizing waste recycling, and improving the thermal efficiency.
Improving the grindability of materials; The clinker from the rotary kiln rotating by cylinder's rotation drive that the material is in full heat exchange with air ,so that the material cooled to 200 ℃ below, and at the same time improving the clinker's quality and grindability.
Shortening cooling time; The cooling machine can improve the structure of the lift plate as well as layout form, and adjust the cooling drum's inclination and speed, to increase the contact time of clinker and cool air, controlling the clinker's movement speed provides plenty of time for the transmission of the clinker 's internal heat to the surface.
Improving thermal efficiency;The cooler manufactured by Fote can send all air into the kiln as a secondary circulating air after cooling material, improving the thermal efficiency of the furnace.
Good cooling effect; When this series drum coolers work, the clinker is raised repeatedly in the lifting area and evenly distributed, the cool air and the hot clinker have strong heat exchange.
High-temperature clinker into the cooling machine by feeding device, cooling machine's rotation driving that the material has sufficient heat exchange with the air, at the same time, keeping running as the kiln body according to the design of slope and revolving speed. The material is periodically rolling forward in the stove and raw material is sent from the feeding inlet to the discharging end, and to ensure that the material can be cooled to 200℃ below in time when through the rotary kiln.